Husqvarna 250 continued

I finally got to sew with the Husqvarna 250 yesterday morning.  I have to say I wouldn't go out of my way to own one but I have certainly sewed with worse machines.  It certainly has a range of stitches, both functional and decorative.  My stitch sample can be seen below.

The tension isn't perfect, I know but after sitting in the shop for a few days so many children will have 'adjusted' the tension that there is no point in me perfecting it.

Much to my surprise this machine came complete with most of the original accessories.  All of the original feet, the brush and throat plate remover (in one), the light bulb holder, spare spool pin, spool holders, clearance plate and one bobbin were remaining.  And the instruction manual of course (if anyone would like a copy, let me know).

It also came with the hard cover and the flat-bed was still with the machine.  Flat-bed attachments have a frustrating tendency to go walkabout.

Janome and Husqvarna 250

I've had a long absence due to occurrences beyond my control.  However, last Saturday I had these two machines to work on.  I haven't sewn with either yet, depending on what happens I should be able to get to it on Saturday.

The Husqvarna is an Electronic model 250.  I can't easily take it apart but there was a big knot of thread in the bobbin area.

This machine is white and very reflective so it took very bad photos, I might try it outside on Saturday.

The other machine (and apparently they did come from the same owner) is a Janome.  It doesn't seem to have a model number but looks like it's somewhere between lovely old Janome and modern less than lovely Janome.  This one has some plastic cams.

Under the faceplate is pretty standard.

Interestingly this has one of the throat plates that automatically adjust for straight stitch or zigzag.

The bobbin area was slightly fluffy and it's a full-rotary machine as well.

From the front and showing stitch selection.

Hopefully I'll be able to get both these machines out for sale this week end!

Some more disasters!

I apologise for my long abscence, the last couple of weeks have been hectic.  I'm determined to get some (any) time to sew tonight, I want a new top to wear on Monday.

Today I spent a very unsuccessful couple of hours trying to make these machines behave.  They are both Janome's, in fact I think that makes a total of three Janome's I have had that have had this issue.  They both skip, one moderately the other so badly it's hilarious.  I decided that considering there doesn't seem to be anything else wrong it must be the timing, my first problem was being unable to find a timing mark.  Is it just me or do most machines not have a timing mark?  Anyway, I started with what I shall call Janome1, it is a front loading oscillating machine and to be truly honest I had no idea how to time it.  I looked at it a bit and decided that my best bet was disconnecting the connector rod that connects the top to the bottom, as per picture below.

I managed eventually to get it back together but it still doesn't want to play nice!  I think it's slightly better and I think maybe I just have to tweak it repeatedly until it works but I'm not over happy with it.
This machine was unfortunately made with plastic gears and cams but fortunately they're all in one piece so far.

Machine no 2 was another Janome, Janome2.  It is apparently a 'Heavy Duty' computerised machine, not that I thought those two phrases could exist comfortable together when talking about sewing machines!  It is a top loading full rotary machine.  For some reason the hook is actually striking the needle and the net result is something that looks like extra-long basting stitch.  Not all that practical when you're trying to sell a machine!  I'm wondering if I've got the needle in correctly but I have it mounted flat to back and I really can't see it differing.  I tried re-timing it by adjusting the belt that connects the top and bottom but it was mighty unsuccessful.

The little electronic bits fascinate me although I know they are an absolute pain if they break.

 I think this machine has had a bit of a beating, the throat-plate is badly hacked from needle strikes and the plastic base of the hook (which I forgot to take photos of) is scratched to shreds almost.

I'll try and post a bit more regularly again but finding the time is hard!